The first two cabinets are placed in position (Image 2) and clamped together using quick-release bar clamps (Image 3).As with the upper cabinets, the cabinets are secured together using stainless steel screws.

updating old wooden kitchen cabinets-15

Updating old wooden kitchen cabinets muslim lesbian dating

The installers first pre-drill pilot holes, then install the screws.

With the first two cabinets attached together, the installers secure them to the wall with screws (Image 4).

Installing the molding is a time-consuming process since each section must be carefully fitted and clamped before it is attached using both wood glue and nails.

Once the molding is done, a bead of light-colored caulk is applied in the groove between the upper cabinet and molding to conceal the seam (Image 1).

It is lifted into place, and the preinstalled electrical wire is fed through the hole at the back of the cabinet.

Next, the cabinet is attached to the wall (Image 2) using wood screws.

With the second cabinet lifted and held in place, the installers clamp it to the first cabinet using quick-release bar clamps (Image 3).

After making certain that the edges of the two cabinets line up perfectly, the installers drill a pilot hole through the framework, then secure the two cabinets together with stainless steel wood screws.

The installers hold the open-shelf unit against the corner cabinet (Image 2) and attach it using a nail gun.

They then re-hang two of the cabinet doors and make a few minor adjustments on the hinges to ensure that the doors hang and open properly.

For attaching crown molding at the top of the cabinets, measurements are taken and a width is decided on for the molding's overhang at the top of the cabinets.